Flash plug with tasmota – ufff

see www.tasmota.info

Attention: some wlan-drivers won’t work with hostapd. I finally got it running using the following steps…

Bananapi M2U:
modprobe bcmdhd op_mode=2 firmware_path=/lib/firmware/ap6212/fw_bcm43438a1.bin

now hostapd will work and you can flash as described
after flash and wlan config --> reset 5 (clears everything left from flash except new wlan-info)

after reboot --> config/config_other:
template (need to put all in the textbox in one line):
{"NAME":"Gosund EP2","GPIO":[320,0,576,0,2656,2720,0,0,2624,32,0,224,0,0],"FLAG":0,"BASE":45}

click activate and save


if something went wrong --> hold button for at LEAST 40 sec!!! that resets everything